This COVERED LOADIING DOCK with DEPOT attached is in HO (1/87th) scale. The covered support structure of the model needs to be printed multiple times for the overall length that you want for your layout. This model scales very well to N gauge (54% in XYZ) if your printer is using a .25mm nozzle. The windows and doors are printed in two pieces for clean printing and ease of painting before installing. The enclosure of the truss ends is up to you how you want to finish them.

Here's an interesting point for me to bring to your attention. Every model that I have designed is based on real world measurements and therefore each building is interchangeable with other structures. Simply bring the .stl file into any CAD program, even the wonderful TinkerCAD and combine to make a completely new design to 3D print.

I exclusively print with PLA and have found that ordinary clear lacquer thinner (Nail polish remover) is a wonderful glue. Make a small test for yourself of two pieces of scrap PLA and give it a try. Let sit for 20 seconds and then try to break it apart. It leaves no residue and is applied with a small brush. I've been using lacquer thinner as a glue on styrene and PLA for years. No sloppy or messy glue to show when finished.

If you would like me to design a custom model for you contact me directly at:

garylavart@yahoo.com.

It is totally free but I will post it on Thingiverse for others to print and enjoy.

Happy modeling,

Gary Lavarack - 3Designer