Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Summary Leonidas
Update 2024-01-10: Neo Dragnoid has 2 different spring variations. Left and Right Arm Alt is for the other spring set. Print both if you dont know which spring set you have.
Resin printing is HIGHLY recommended
Finally releasing the fully functioning Leonidas! I used a Neo Dragonoid (Legacy) but make sure to check the springs as only one version of Neo will have the right springs for this. You can easily check by the side flaps on Neo, the springs will have an arm that goes down, that is the one you want to use.
Video: https://www.instagram.com/p/C1c-K_LLn5j/
Manual is still available for those who only want a shelf piece without all the hassle https://www.thingiverse.com/thing:5833249
Pin hole: 1.6mm
Recommended pin size: 1.4mm-1.5mm
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta