Anemometer with wind direction indicator.

User Creation Mix: neovista85 - Thingverse

I modified the original project to insert bearings and make some mechanical and aesthetic improvements.

IMPROVEMENTS:

-Prettier aesthetics, with bolder designs and horizontal fins on the wind indicator, as well as improved resolution of the pieces.

-Easy to print.

-Better precision, works even with little wind.

-I modified the project so that the two axles have a separate bearing, this removes the friction between the hub of the wind balls and the wind direction marking (it is only effective if you use "Washer_separation" between the bearings.

-I inserted an improvement in the wind sphere, so that it does not come loose from the cube.

-No glue required.

-I increased the diameter of the fixing rod to 12mm.

Known issues:

-The fitting of the wind spheres still has a gap that needs to be corrected, but it does not interfere with operation.(AJUSTED 30/11/2023)

REQUIRED FOR ASSEMBLY

3x M4 x 12mm Screws

3x M4 Nuts

2x Ball bearing R608 d=8 mm D=22 mm B=7 mm

1x fixing rod diameter 12mm

3D PRINTING SETTINGS -Parts are already in the recommended guidelines

Base_do_cubo, Base_do_indicador

Layer: 0.15

Walls: 6

Fill:60%

Support: No

Material: PET-G or ABS

Cubo_superior, Cubo_Inferior, Indicador_de_direção v2, 3x Esferas de vento

Layer: 0.2

Walls: 3

Fill:30%

Support: No

Material: PET-G or ABS