Buy a pre-made warp core expertly crafted plus many others here: [https://warpspeed3dprinting.com](https://warpspeed3dprinting.com)

Upgraded Features:

- Internal LED divider pieces now use 10 vertical segments of 11 LEDs instead of 20 segments of 5 LEDs (way less soldering) - Power conduits are designed for 6 LED segments instead of 12 - Power conduits are bolted to the chamber via 3x6mm screws - LED dividers are screwed together via 3mm screws and attach to the chamber LED structure via 3mm screws - Revised base for deeper recessed button - Revised base for "NCC-1701-D" light-up lettering - Revised reactor chamber with rounded edges that require zero support - Probably other improvements, as there's been so many

Printing tips

• print the coils with 0% infill
• print the chamber upright with support
• print the windows, coils and inner power conduit with a transparent filament

Notes

• Music wire: cut to smaller lengths and glue around the coils (see example image) this gives the warp core a more screen accurate appearance I purchased the music wire from a local hobby shop. K&S is the brand I believe Amazon sells it as well
• LED strips: LEDs must be 5mmx5mm (5050 chips) and 5mm apart from each other on the strip. The strip must be 10mm wide MAX.I use the BTF Ws2812B LEDs purchased from Amazon: https://www.amazon.com/dp/B07BTTY4FL?ref=ppx_yo2ov_dt_b_product_details&th=1
• WLED Installer website here: https://install.wled.me/
• YouTube video on how to flash WLED and setup/control LEDs vis WLED: https://www.youtube.com/watch?v=GYxctjukehY

Assembly Tips

• MCS LEDs: 10 strips of 11 LEDs
• Chamber LEDs: 1 strip of 10 LEDs
• Power conduit LEDs: 2 strips of 6 LEDs
• Base Lettering: 1 strip of 7 LEDs

Shopping List

• 5v power supply: https://www.amazon.com/gp/product/B07Q26YG61
• D1 Mini ESP board: https://www.amazon.com/gp/product/B07RBNJLK4
• LED strips (qty 2): https://www.amazon.com/gp/product/B07BTTY4FL
• Power button: https://www.amazon.com/DIYhz-Self-locking-Latching-Button-Switch/dp/B07DWRGWSZ
• 0.062 wire: https://www.amazon.com/gp/product/B0006MZN9U/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
• Power jack: https://www.amazon.com/Fancasee-Female-Socket-Connector-Adapter/dp/B07Y8KKSR1

https://www.youtube.com/watch?v=plmuxBghTPg

WLED Presets and Config files: https://warpspeed3dprinting.com/pages/getting-started-xl-warp-cores