Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Pocket Operator Case SLS version por crashdebug no Thingiverse

Descrição

I'm releasing the "shapeways version" of the Pocket Operator case, optimized for SLS printing. Thinner parts with tighter tolerances.

The case has been printed by shapeways a fair number of times with good feedback. There was one instance where the "closed back" was reported to not fit with the front shell - I could not verify this, the tolerances in the 3d model seem fine. Consider this when ordering it at a printing service.

Originally available at https://www.shapeways.com/shops/cdb - I will take down the shop in the near future, as there are meanwhile other/cheaper services where you can have the case printed.

Thingiverse

Pocket Operator Case SLS version

crashdebug crashdebug (abre em nova aba)
4
Curtidas
0
Downloads
5
Coleções
1
Impressões
Licença Creative Commons - Attribution - Non-Commercial - Share Alike
Arquivos (27)
Button_v5_wide.stl 73.8 KB
Light_guide_v4_array_x5.stl 22.2 KB
Light_guide_v4_array_x4.stl 17.9 KB
Case_Back_full_v5_light2.stl 10.2 KB
Case_Back_full_v5_light2_closed.stl 21.2 KB
Light_guide_v4_array_set.stl 75.5 KB
Case_Front_full_v6_light3_label_PO16.stl 454.2 KB
Case_Front_full_v6_light3.stl 388.9 KB
Button_v5_wide_sprue16.stl 478.6 KB
Case_sprue_clean.stl 401.3 KB
Light_guide_v4_array_set_w_spare.stl 97.5 KB
Button_v5_wide_sprue8.stl 393.8 KB
Case_Front_full_v6_light3_label_PO28.stl 454.4 KB
Case_Front_full_v6_light3_label_PO12.stl 435.3 KB
Case_Front_full_v6_light3_label_PO14.stl 442.5 KB
Case_Front_full_v6_light3_label_PO24.stl 443.5 KB
Case_Front_full_v6_light3_label_PO20.stl 450.5 KB
Case_sprue_po20.stl 460.9 KB
Button_v5_wide_numbers_x16.stl 637.2 KB
Button_v5_wide_sprue24.stl 716.1 KB
Button_v5a_wide_numbers_sprue16.stl 656.3 KB
Case_Front_Triple.stl 1.2 MB
Button_v5a_wide_numbers_x16.stl 637.2 KB
Button_v5_wide_x24.stl 689.1 KB
Button_v5_wide_numbers_sprue16.stl 666.9 KB
Case_temp_Front_Full_v6_light3_mic.stl 420.8 KB
Case_Front_Full_v6_light3_mic_label_PO-33_v2.stl 507.9 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora