This is a nice DIY arcade stick project. Simply follow the instructions below.

1- 3D-Print the plastic box. If your printer is small, you can slice the box and then glue the parts together. I attached ready-to-use sliced parts that can fit most 3D printers.

Some arcade buttons come with smaller fasteners. For that, I've added an additional 3D-printed part to help with this problem. You can use it if you face a problem with your arcade buttons.

2- Lasercut the front panel using an acrylic sheet. I prefer 3mm acrylic sheets.

3- Print out your graphics on a sticker and apply it on the acrylic sheet.

4- buy the needed hardware, electronics, and tools. the links below will help you find them.

5- put everything together and enjoy your nice DIY arcade stick!

https://www.youtube.com/watch?v=WX9YVjIHIqA

Hardware and tools

1 Arcade DIY Kit https://amzn.to/3QpkDqk https://s.click.aliexpress.com/e/_EIvWry3

2 USB connector socket https://s.click.aliexpress.com/e/_DBRcvuJ

3 Acrylic Sheets https://amzn.to/47kEZqA https://s.click.aliexpress.com/e/_Dnb4ez9

4 Countersink bit https://amzn.to/3OFfKbo

5 Threaded Insert Embedment https://amzn.to/43WyW8G https://s.click.aliexpress.com/e/_DkkDnVp

6 M4 Hex Socket Flat Head Countersunk Bolts Screw https://amzn.to/3Kqv0pP https://s.click.aliexpress.com/e/_DFSlZYn