This wall mount adapter is for the Ring Alarm Base Station. It has not been tested with the Pro version of the base station. The adapter has a hole pattern to match most electrical wall outlet boxes and attach to the keyhole mount of the base station. The design also has a cable anchor on the back side for strain relieving a POE splitter.

The model should be printed with the adapter plate vertical. This is designed to allow the weight of the base station to apply force orthogonal to the layer direction.

While 100% fill is recommended, the minimum is to set an 8 mm bottom layer for the hooks.

The pictured install used a low voltage single gang wall bracket along with a POE splitter that provides 5V 2.4A using a 5.5x2.1 mm power jack.