Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D DoublyDrivenExtruder por pghauff no Thingiverse

Descrição

Doubly Driven Pressure Adjustable by Nema11 Motor and filament feed rate sensor.

Shapeways http://shpws.me/TxWz

DoublyDrivenExtruder Two bolts drive the drive_pulleys that drives the filament into the hotend . Driven by a gear set and belt and one nema17motor.

Pressure Adjuster Reduces pressure in rotations of stepper.

Feedrate Sensor Uses a continually rotating high precision 100K potientiometer

Marlin Firmware and Closed Loop Stepper Motor https://reprap.org/forum/read.php?415,855273

Marlin/Marlin/Configuration_adv.h

Extruder(E0) Enable Pin External Pin to signal move complete https://github.com/pghauff55/DoublyDrivenExtruder/

Thingiverse

DoublyDrivenExtruder

pghauff pghauff (abre em nova aba)
2
Curtidas
0
Downloads
4
Coleções
Tags
Gregs Wade Extruder wade
Licença Creative Commons - Attribution
Arquivos (46)
extruder-hinge-plate.stl 17.1 KB
extruder-feedrate-sensor-3-2.stl 81.3 KB
extruder-feedrate-sensor-3.stl 145 KB
extruder-feedrate-sensor.stl 149.1 KB
extruder-drive-pulley.stl 281.3 KB
extruder-idler.stl 70.1 KB
extruder_idler.stl 72.9 KB
extruder-frs-gt2-wheel2.stl 223.7 KB
extruder-feedrate-sensor-3-1.stl 150.1 KB
extruder-frs-gt2-wheel1.stl 221.4 KB
ParametricHerringboneGears-2.stl 830.7 KB
extruder-drive-pulley-nut-cap.stl 289.3 KB
Idler.stl 388.3 KB
extruder-gears-2.stl 307.7 KB
ParametricHerringboneGears.stl 576.4 KB
ParametricHerringboneGears-1.stl 366.7 KB
extruder_body.stl 491.5 KB
extruder-feedrate-sensor-1.stl 595.7 KB
extruder_main_gear.stl 1.1 MB
extruder-gears-1.stl 995 KB
extruder-assembled.stl 4.9 MB
extruder_drive_gear.stl 248.3 KB
extruder-drive-pulley55T.stl 360.6 KB
extruder-drive-pulley-nut-cap56T.stl 393.4 KB
extruder-drive-pulley56T.stl 360.8 KB
extruder-drive-pulley-nut-cap55T.stl 388.9 KB
extruder_drive_gear-1.stl 341.6 KB
extruder-drive-pulley54T.stl 354.2 KB
extruder-drive-pulley-2.stl 689 KB
extruder-drive-pulley60T.stl 393.6 KB
extruder-drive-pulley-1.stl 693.4 KB
extruder_motor_bracket.stl 263.5 KB
extruder_drive_gear.stl 834.6 KB
extruder-drive-pulley58T.stl 1.3 MB
extruder-drive-pulley57T.stl 1.3 MB
extruder-drive-pulley56T.stl 1.2 MB
extruder-drive-pulley.stl 1.3 MB
extruder-gears-2.stl 1.6 MB
ParametricHerringboneGears-2-T15-3.stl 2.7 MB
ParametricHerringboneGears-2.stl 2.3 MB
ParametricHerringboneGears-2-T15-2.stl 2.6 MB
ParametricHerringboneGears-2-T17.stl 2.5 MB
ParametricHerringboneGears-2-T15.stl 2.5 MB
extruder_body_v3.stl 3 MB
ParametricHerringboneGears.stl 2.9 MB
extruder-gears-1.stl 4.8 MB
Ver no Thingiverse (abre em nova aba)
Comparar agora