Works with Bambu Lab X1/P1P printers.

Switch-controlled Barrel Connectors with each barrel being set to 5v, 12v, or 24v.

Fully Assembled Bambu Switch 440 ready to attach to your Bambu Lab X1, X1C, P1P, 3D printer. It utilizes the 24v provided by the Bambu Bus Cable.

Kit and assembled model available at https://www.etsy.com/shop/3dMachinist

Specification

Materials: Plastic, metal, printed circuit board Input: 24V 3A Print size: 120mmx54mmx20mm Barrel Tip is positive

Contents:

Printed Model (light gray) Bambu Power Tap V1.3 PCB 2x DC Jack 5.5x2.1mm Female Connector 1x M3x22mm Socket Head Screw 1x M2.5x22mm Socket Head Screw 4x M3x4mm Screws 2x M2x6mm screws LM2596 Stepdown converter (provides 5v or 12v to each barrel connector)

History:

I had installed LED lights on my X1C, using a 6-Pin cable to access the 24v provided by the printer to the AMS unit (by plugging it into the second AMS 6-Pin port). That worked great when I only had one AMS, but the cable length became a concern when I added my second AMS.

I designed a Bambu Power Tap to utilize the 24v on the 4-pin Bambus Bus Cable.