This is a bracket for installing a hygrometer inside a drybox. There are two types of brackets that are inserted horizontally and vertically. The target hygrometer is rectangular and measures 48x28x16.

[feature] -The hygrometer can be detached by sliding, making it easy to replace the battery. -When you slide hygrometer and push it in, it will stop at the specified position with a click feeling at the end. Tilting the drybox or upside down will not cause the hygrometer to slide out.

[attachment] Stick the adapter inside the drybox with double-sided tape. The flat side is the sticking side.

[print conditions] -printing type: FDM -printer: Original Prusa i3 MKS -filament: PETG -support: no -brim: no -raft: doesn't matter -infill: 15% -shell: 2 -nozzle diameter: 0.4mm -layer height: 0.2mm -print directions: Please refer to the photo.

[update] 2023/06/11 I added a vertical slide type one. "hygrometer_sliding_bracket_v.stl"