Ever want to move a bunch of stuff from one place to another? Have a bunch of gridfinity stuff? Well, I wanted to get in on Zach's madness and rather than reinvent the wheel, I reinvented the other wheel. I reimagined a tool-tote as a Gridfinity moving contraption. This is a colossal waste of plastic... it would probably be smarter to make a box out of cardboard or something and put the bins in it... or just use a filament box from the filiment you didn't waste printing this thing out... but I'm not that kind of guy. Being all Gen-X and stuff, I believe in better living through plastic, plus I wanted a big print that I might be able to do something with and still be able to test out my ender 5 plus with all the new mods installed. This is too big to print on most printers... you need one axis that can print about 350mm. (it should be X or Y... Z would be an even bigger waste of plastic unless you can bridge like a fiend...) otherwise, you could chop up the box to fit it on a smaller printer. It holds 28 'finities... grids... squares... whatever. 28 (4x7) units in the XY dimensions (since you can stack 'em)

Finished tote requires two M5 screws at least 10mm long.

If you print it, post a make... I dare you.

5/17/2023 EDIT: I created 2 more sizes and modified the original... the big 4x7 box is my favorite, it holds 28 gridfinity boxes and the nxnx6 boxes fit just under the outside lip... but 7 long won't fit on a "standard" bed... so I made some other sizes... I did skip the 4x6 size because the shape wasn't as appealing to me... but If anyone wants one, I will cad it. smaller than 4x4 seems kind of silly too.. though I might do a 6x3 or 5x3 at a later point.

4x7 requires a larger print bed... 310mm wide.... 4x5 will print on an ender 3 or other 235+ wide printer 4x4 will print on a smaller printer... so any 200mm square print bed...

i also shrunk the height because the box just doesn't need to be 250mm high.