First major 3D printer project! A controller mounted case for a 7 inch HDMI screen and a Raspberry Pi 4. This is made to run Retropie and Kodi and was completely designed in Tinkercad.

If you have any ideas,suggestions,tips or makes, please let me know!

Links- Sunfounder 7" Screen https://www.amazon.com/dp/B07Y889J3X?ref=ppx_yo2ov_dt_b_product_details&th=1

Logitech F310 https://www.amazon.com/Logitech-940-000110-Gamepad-F310/dp/B003VAHYQY/ref=sr_1_2?keywords=logitech+gamepad&qid=1680493720&s=electronics&sprefix=logitech+game%2Celectronics%2C173&sr=1-2

Case Fan- https://www.raspberrypi.com/products/raspberry-pi-4-case-fan/

Requires x12 M3 .5 screws and x4 nuts for it

Assembly- In this order! Insert Trongle Plug through front of baseplate and into Trongle Use x4 screw and nuts to attach Pi Base tabs into backplate Start (but not all the way through) x4 screw from the back of backplate into included standoffs Loop cable into slots, align screen on top of cables. This is annoying, and I'm sorry. Once screen and cord in position finish screws into standoffs Use remaining x4 screws to attach bezel Friction fit and connect fan into Pi case lid Slide arm into rail Connect cables Hook the top of the controller mount on the top of the controller and pull the bottom under the controller. It will be snug, it's designed that way.

Full Credit to-

Raspberry Pi 4 Snap-Fit Case with Fan (No screws needed) by dougeefresh https://www.thingiverse.com/thing:4893525

Logitech Gamepad F310 Wall Mount by DCSL https://www.thingiverse.com/thing:2754667

Generic Mounting Rail and Mount (Magnet Assisted) by 0ops1e https://www.thingiverse.com/thing:4950166

Flat Panel Creator by DaddyOh5150 https://www.thingiverse.com/thing:2810456