Just a little Talon Claw T4.

I wanted a reliable springer that can run lighter springs and shorter barrels specifically for indoor games so I made this remix of the Talon Claw T4. Uses 3 Caliburn C4 sized aluminum flatbar running the whole length of the blaster.

I run a 9kg OOD Retaliator spring in mine and get roughly 130fps with fresh bamboo V2 darts; I've included files for an optional spring guide for this spring. It has a 73mm draw length and will fit any spring that compresses down to ~30mm.

Uses standard Captain Slug fasteners. Plunger tube needs to be cut to a custom length of 109mm, or you can use an ESPER length plunger tube + the printed plunger tube spacer. Files are included for a 3D printed ramrod and priming bars. Haven't had any issues using a printed ramrod and priming bars, but I haven't been using this blaster for long so use at your own risk! Alternatively you could use the prints as guides to make your own aluminum flat bars and cut down a regular Talon Claw ramrod.

Hardware kits available here: https://www.etsy.com/listing/1458775153/mini-claw-mc4-hardware-kit

Parts are not oriented correctly, please see Captain Slug's assembly instructions for proper print orientations if you are not sure (http://captainslug.com/nerf/T4Assembly1.pdf). Assembly process is almost identical to the Talon Claw T4.

Inspired by Ehdrien