Modular height platforms for aerial compat/encounters in D&D games.

Simple modular height platforms for aerial compat/encounters in D&D games. All elements are compatible with 1 inch (25 mm) grid.

This project contains:

• DnDHH-Rod_[Single/Double/Triple] - segment of height of 5 ft (1,5 m), 10 ft (3 m) and 15 ft (4,5 m) respectively
• DnDHH-Rod_Single_B - special variant of segment of height of 5 ft (1,5 m) with a modified top that can hold this acrilic grid plate;
• DnDHH-Plate_3x3_[Bottom/Top] - platforms with a 3x3 inch grid with a connector slot in one corner (occupies 1 grid cell);
• DnDHH-Plate_4x4_[Bottom/Top]_A - platforms with a 4x4 inch grid with a connector slot in one corner (occupies 1 grid cell);
• DnDHH-Plate_4x4_[Bottom/Top]_B - platforms with a 4x4 inch grid with a connector slot in the middle of one side (occupies 2 grid cells).

Note: I've created this project from scratch by myself, however the general concept was took from Chad's project, therefore I want to give him credit for that.

Print settings

• nozzle size: 0.4
• layer height: 0.2 will be sufficient
• wall line count: 3
• infill: 30-40%
• support: no