Here is a wine rack design i came up with. All the parts except for the mounting hardware is printed. Can be mounted vertically or horizontally. Can also be made to hold how ever many bottle you like. But keep in mind the more bottle you plan to hold, the more wall mounts you should include.

Print Settings were two shells with 20% infill for added strength.

Don't forget to post pictures of your makes!

Enjoy!

Tools needed:

Pencil
Level
Drill
Phillips Screwdriver

Hardware:

Use M3 x 12mm bolts to connect the Main bodies to the connecting rods. There are 2 bolts per connection for added strength. Use M3 x 40mm bolts to connect the wall mounts to the Wallmount_Connecting_Rod.

To mount rack to the wall.

If mounting to studs you can use #8 x 2 - 1/2 in screws to mount to the wall. I would also use some washers

If mounting to drywall you will have to use some drywall anchors and using #8 x 2 - 1/2 in screws to mount the wine rack to the wall

Link to the drywall Anchor kit that I used: http://www.homedepot.com/p/Zip-It-8-Nylon-Anchor-with-Screw-20-Pack-376229/202243022

Enjoy