Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D tabernack666 por yourownpersonalsoundbitch no Thingiverse

Descrição

This is an LED lamp created to also house a 7" record. The flat pieces (doors, roof front and back, and back panel .svg files) were cut with a glowforge out of 1/8" acrylic. The columns, coffin sides, and hinges were printed with an SLA printer, and everything else was printed with an FDM printer. A tiny bit of sanding may be required for fitting the columns onto the beams and base. 12x 1cm pieces of aluminum tubing were used to rivet the doors to the hinges and 2x 23cm of aluminum tubing were used to connect the hinges to the knuckles and base. Instructions for making the LED strip are not included.

Thingiverse

tabernack666

yourownpersonalsoundbitch yourownpersonalsoundbitch (abre em nova aba)
4
Curtidas
0
Downloads
3
Coleções
Licença Creative Commons - Attribution - Non-Commercial - Share Alike
Arquivos (18)
tabernack.stl 14.8 MB
base_L.stl 31.4 KB
hinge_R.stl 93.7 KB
column_1.stl 352.9 KB
column_2.stl 174.8 KB
roof_R.stl 114.1 KB
beam_R.stl 32.5 KB
coffin_sides.stl 672.6 KB
roof_L.stl 102.8 KB
column_4.stl 287.4 KB
column_3.stl 256.3 KB
beam_L.stl 34.8 KB
spire_2_skulls.stl 3.4 MB
hinge_L.stl 82 KB
base_R.stl 26.8 KB
spire_1_money.stl 3.3 MB
spire_4_coins.stl 833.8 KB
spire_3_six_packs.stl 1.4 MB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora