WORK IN PROGRESS!!!!

Decided to make my own version of the new Stream Deck Plus for sim racing as a remix of the RaceLogic by Bregfer. It uses a stream deck and adds some rotaries for additional functionality. Mine is a Mk 1 stream deck, so I had to permanently remove the front plate. I tried to get my design printable on an Ender 3, hence the compact footprint. The design uses heat set threaded inserts for all fasteners. I used inserts from this kit [https://www.amazon.com/Hilitchi-Threaded-Embedment-Assortment-Projects/dp/B07VFZWWXY/ref=sr_1_3?crid=2UFAPNCE84BVG&keywords=heat+set+insert+hilitchi+460&qid=1677348968&sprefix=heat+set+insert+hilitchi+460%2Caps%2C90&sr=8-3]

The idea was to have a single Pro Micro power both the screen and the rotary encoders, but work is in progress with that code too. I used CTS-288 for my encoders which do not have full arduino support (it takes two indents to register an input).

BOM Stream Deck Arduino Pro Micro Nextion NX4024T032 5Ft USB to USB micro cable Threaded inserts M4 10mm (H) x 6mm (W) - 4 count Threaded inserts M4 4mm (H) x 6mm (W) - 4 count Threaded inserts M3 4mm (H) x 5mm (W) - 8 count M4 Flat hex head socket cap screws M4x20 - 4 count M3 Hex button head cap screw M3x10 - 6 count M3 Hex button head cap screw M3x6 - 2 count