Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
You will need:
-
About 8 to 16: M3 x 16mm bolts, washers, and nuts. (do not over tighten the nuts. there is no need to as you will break the plastic.)
-
5 ft. L x 36 in. H Galvanized Steel Welded Hardware Mesh with 1/4 in. x 1/4 in. Mesh Size Garden Fence
Price: $7.54 (1/20/2023)
Cut to: 11 inches x 23 inches
For less than $20 you can make your own live catch mouse trap.
6mm x 6mm x 1mm
6mm = 1/4 inch
=============================
Ender 3 Printer Filament: PETG Layer Height: 0.2 mm Infill: 50%
Top Multi-Catch Mouse Trap.stl No Support Build Plate Adhesion: Raft Time: 2 days, 14 hours, 20 minutes Cost about: $8.45
Bottom Multi-Catch Mouse Trap.stl No Support Build Plate Adhesion: Raft Time: 1 day, 6 hours, 19 minutes Cost about: $4.06
Food Multi-Catch Mouse Trap.stl Need Support: Normal, Everywhere, 45 degrees Build Plate Adhesion: Raft Time: 1 day, 0 hours, 40 minutes Cost about: $3.86
========================
Videos:
How to put this mouse trap together: https://www.youtube.com/watch?v=7SPKCwlhjks
BILLY - BOB Mouse Trap. Multi-Catch Live Trap Perfect for Vehicles and Small Spaces Mousetrap Monday https://www.youtube.com/watch?v=Jz1KuN1IGFI
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta