Wall hook for a broom with a little flair. The opening diameter of the .STL is 22mm. To resize use the Customizer feature.

Enjoy.

I printed this hook on a MakerBot 2X in PLA on kapton. Build plate at 70C, extruder at 205C, 3 shells and 15% fill. I turned on supports for the mounting hole relief cuts on the back of the hook.

Customizer Settings:

Handle_dia: diameter of the handle of the broom handle, 22 mm in my case
Mount_height: Vertical height of overall part
Wall: Thickness of the walls of the hook, bigger for more weight
Drop: Amount the hook rakes downward toward the wall
Tab_thickness: Thickness of the plate against the wall
Hole_dia: Diameter of mounting holes
Wedge_height: Vertical height of the hook wedge shape
Fn: Number of facets on cylindrical surfaces, more makes rounds smoother.