** UPDATE 3/30/23- Per request I added a modified version of the mount that tilts the left and right MFD's up. The new files have a V2 at the end of the file name. I have not printed these new files so I cant verify that they work!!

This is a mount for the WinWing MIP. I wanted to be able to mount the UFC and DDI's to a flat panel in my simpit and the clamps didn't really allow me to mount them the way I wanted. This mount is also much more rigid than the clamps so when you push a button, it feels solid.

The UFC and HUD control get bolted to the left and right pieces first, then the right and left DDI's mount to the assembly. I designed this to use the same bolts you would use to mount to the clamp mounts. There are four screw holes to attach the assembly to your panel. Its best to scribe a line on your panel and drill the holes first. The middle two screws are tricky- I used a pair of tweezers to hold the screws while i inserted a screwdriver between the UFC and DDI to screw it down. Once this assembly is mounted the center DDI slides right in and is attached with four screws.

All my cables lead to the rear of the UFC and pass through a hole in the panel.

................................................................................................................................... The Boxes around the panel are for switches and indicators that interface with DCS-BIOS. I switch to white PLA for the last few layers for the letters. These obviously aren't exact.. But they have the functionality that I wanted.