Up your sartorial game!

This mash-up of the "MakerBot M," http://www.thingiverse.com/thing:4390 and the "Cufflink backside curved," http://www.shapeways.com/model/68390/cufflink_backside_curved.html will let you discreetly rock the big M at your next formal event.

The M's edges are radiused to protect your finest gear; Jacob The Jeweler-esque bling is optional!

All STL files are 100%. The cufflink in the photo was printed at 80% using the Makerbot M Cufflink.stl file because 100% was a bit too large for me; scale to suit the suit.

The current versions of these files require support material:

• MakerBot M Cufflink.stl
• Cufflink backside curved.stl

2011-01-31 UPDATE Supported version uploaded: Makerbot_M_Cufflink_Supported.stl. The overhangs are supported by sprues that need to be removed after printing. This hasn't been printed, but it should work. Please let me know, so I can remove the WIP banner. ViaCAD 3D file also uploaded.

2011-01-25 UPDATE Versions that do not require support material are in the works.

1. Print Makerbot M Cufflink.stl file at desired scale factor. Printing with the M at ~ 45° angle to the build platform will provide strength to the cufflink.
2. Rock the big M in your favorite French cuff shirt!