A remix of rogeman009's great button design; I smoothed the bezel a bit, but I mainly converted the switch to a threaded connection instead of clips, which I had issues with. slightly bigger hole size, but way more stable and adjustable. If your machine is dialed in, the base should screw in to the bezel once supports are removed. I highly suggest and recommend using Tree supports if your slicer supports them. You may need to shorten the male threaded section of the Bezel part to work on thinner panels You can dremel, file, etc the threaded part shorter, or shim the switch with washers/spacers, etc. However, this mod has proven to be useful, so I'm sharing it.

Big thanks again to rogeman009 for sharing the original that this remix is based off of. it's an awesome design, and I'm just glad to help.

Addendum: 12/30/2022:

I added three new parts on request; I edited the Bezel and Plunger to make a very close equivalent to the similar buttons found on the Nintendo PlayChoice 10 machines. Soon, I will make a short bezel for the Atari Volcano as well. The files names that start with "NPC10" are the relevant Playchoice button files. They still use the same Base part as the Volcano switch, there are two different lengths of plunger for the Atari version The short should work best, there's a slightly longer one (used with thicker panels). The plunger lengths are meant to be a suggestion. depending on application, you may need to modify the plunger length. Some goes for the original Volcano.