Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D Single Rotor RC Hovercraft por ThomasT7 no Thingiverse

Descrição

I made the following changes on the Single Rotor RC Hovercraft by RianB

Changed in Duct mounting pattern from 16x19mm to 16x16mm
Drill holes expanded from 2.55mm to 3mm to fit M3 screws.
Add second holder to left and right skin
Add more holes to Air Channel Cover for better fixation of skirt
Merged the split components Skirt_brace_top_front*, Skirt_brace_top_rear*, Hull_front* and Hull_rear* for easier 3D printing.

Thingiverse

Single Rotor RC Hovercraft

ThomasT7

41

Curtidas

0

Downloads

65

Coleções

Tags

Hovercraft rc hovercraft

Licença Creative Commons - Attribution

Arquivos (21)

1_1_Duct_16x16.stl 1.7 MB

1_2_Rudder_left.stl 183.3 KB

1_3_Duct_plug_left.stl 5.7 KB

1_4_Rudder_right.stl 144.4 KB

1_5_Duct_plug_right.stl 5.7 KB

2_1_Skin_front.stl 499.8 KB

2_2_Skin_left.stl 231.5 KB

2_3_Skin_right.stl 243.5 KB

2_4_Skin_rear.stl 1004.5 KB

3_1_Air_channel_cover_front.stl 94 KB

3_2_Air_channel_cover_left.stl 55.6 KB

3_3_Air_channel_cover_right.stl 55.6 KB

3_4_Air_channel_cover_rear.stl 105.2 KB

4_1_Skirt_brace_top_front.stl 106 KB

4_2_Skirt_brace_top_rear.stl 91.3 KB

5_1_Hull_front.stl 470.8 KB

5_2_Hull_rear.stl 756.1 KB

6_1_Air_outlet_front.stl 311.7 KB

6_2_Air_outlet_rear.stl 294.4 KB

7_1_Skirt_brace_bottom_front.stl 88.3 KB

7_2_Skirt_brace_bottom_rear.stl 56.1 KB

Ver no Thingiverse

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.