Link to my other sunglasses design: Half Rim Sunglasses

Features: • Designed to use Oakley Gascan lenses • Printed to lens & face curvature, no need for inexact heated frame bending • Print in place hinges make for simple one piece print with no frame assembly required • STL file available with and without built-in supports • Simply twist hinges to free them up after printing • Built-in supports leave a one layer gap (with 0.1mm layers) for easy removal • Oakley Gascan lenses pop in easily

Print Settings: • Orientation: Print upside down with the top touching the build plate • Print with 100% infill (about 29g of filament total) • 0.1mm layer height if using file with built-in supports

STL File Versions of Sunglasses Frame:

1. No supports
2. Built-in brow & bottom-frame supports (easily removed if using 0.1mm layer height)

Lenses: Oakley Gascan replacement lenses are available on the internet for around $10 or even less

Other Information: • Hinges are reasonably robust but will not stand up to abuse • I have printed all my test frames in PLA, but a more temperature resistant material is probably a good idea if you are going to leave them in a hot car

Watch the short video on freeing hinges, support removal and lens installation.

If you print these sunglasses please consider posting a make! Enjoy!!