This is a LEDRing Lamp for a ring of 24 Neopixels.

It consists of a base that takes an ESP32 Devkit V1 MCU and the Neopixel ring and diffusors that are sit on top of the base.

Sources for the 3d parts can be found at: LEDRing: https://www.tinkercad.com/things/6PTZv7HlGrm LEDRing Diffusors: https://www.tinkercad.com/things/2QjFYYTgBHI

The program running on the ESP32 is the same as for https://www.thingiverse.com/thing:4129249, adapted to 24 Neopixels. The instructions there are much better than anything I would write - so get your software right from the source.

The software provides a web server that allows to control the Lamp from a cell phone browser.

Feel free to experiment with additional diffusors and/or masks and/or patterns ;-)

List of materials:

• ESP32 Devkit V1, e.g.: https://www.mikroshop.ch/?gruppe=10&artikel=1490
• Neopixel Ring 24 LED, e.g.: https://www.adafruit.com/product/1586
• 2 * M3 Screws
• USB Power Supply / USB Cable

Power consumption is on the order of 200mA (most patterns) to 1A (white, max brightness), so you may want to program the MCU from your PC before you connect the LED strip in order to not overload your USB port.