This is a DIY button box made for sim racing or another usage.

It was made using Fusion 360 and fits 5 Momentary Switches and one 5mm LED. The switches connect to an Arcade Encoder which I got in a two-pack. The LED can also be connected, but mine is not.

Thank you for checking out this project, let me know if you need me to change something.

HARDWARE:

• 5 12MM Momentary Switches
• 1 5MM LED
• 4 3MM Screws. Max length is around 15MM
• 3D printed parts &/or screws for mounting.

Note, if you don't have screws you can get the BackplateNoScrews file, make sure to glue it.

TOTAL COST: Around 25$.

LINKS: https://www.amazon.se/gp/product/B07XQSBW7Q/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1 (MOMENTARY SWITCHES)

https://www.amazon.se/dp/B07CKN59L9/?coliid=I2FPL51ELLIJD&colid=18EHPS2KMMOIM&psc=1&ref_=lv_ov_lig_dp_it (ARCADE ENCODER, 2 PACK)

https://www.amazon.se/Owootecc-Encoder-Raspberry-RetroPie-Project/dp/B08SC973C8/ref=sr_1_8?crid=8TLTEZUJHOVA&keywords=arcade+encoder&qid=1664723568&qu=eyJxc2MiOiIwLjAwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=arcade+encode%2Caps%2C96&sr=8-8 (ARCADE ENCODER, 1 PACK)

https://www.ebay.com/itm/262911667370?hash=item3d36c1acaa:g:NR0AAOSwpzBdchm3&amdata=enc%3AAQAHAAAA4En11Q9cKsbmSiTPoD%2FtAMauig9a61hQ3CpvgG%2FNco86KxSD7V9TPoHnkX0AxtGH7ZHYeLJn9dWaWucHLX35S9IZ6tKC9TzQ5QjHkP%2BIfKxc%2FoNVkdbUEDORBCUFW8naIDzrYeHNv6uIMxJRizKLiqPQZVSFW8Qvohx02vBpuQJscPtGyvxzSZOL6qeh%2FosMqdZ34Jefgy0MXbOI5PYOOgxZbQ%2F9vvOf8d1rAJcWf1Dg0JyAM3jV9lIyE80CXl5KGbKwABAkRvH01BXbL5YmDFJfqCeu7Gl0%2FUaxEzYCiocO%7Ctkp%3ABk9SR8DDkpTzYA (ARCADE ENCODER, 1 PACK, FROM CHINA)