Lapras vertical NUC case

English:

This is a really over-engineered case for my old (4th Gen) NUC motherboard.

Intel seems keep the same footprint and holes location of NUC till the current 12th Gen, but please double check the dimension before start to print. I also privide the blank IO panel for you to check and measure the IO holes for your motherboard.

Please note to make this case, you will need some basic welding skill and get some switch parts ( For the switch part ). I will provide the link below for your reference :) Please be patient to adjust the fitting size of this part many times, because you need to find the correct switch pressing stroke.

And, for the pins that connect the top and bottom side, please consider to print them lay flat to get enough strength.

Push bottom switch 12x12x7.3mm Amazon link for the switch: [https://www.amazon.com/Gikfun-12x12x7-3-Tactile-Momentary-Arduino/dp/B01E38OS7K?ref_=ast_sto_dp](https://www.amazon.com/Gikfun-12x12x7-3-Tactile-Momentary-Arduino/dp/B01E38OS7K?ref_=ast_sto_dp)

中文：

这是为我的老NUC主板设计的立式小机箱。

英特尔似乎在NUC产品线上维持了一贯的尺寸和孔位。但请务必提前测量好您主板的孔位，避免翻车~ 我提供了空白的IO面板，供您实配测量您的孔位。

请注意这个设计的开关面板，需要您具备基础的锡焊技能并购买适合的轻触开关。购买链接如下。请保持耐心去多次调试这个零件的配合尺寸，因为您需要找到正确的开关按压行程。

对于连接主体前后盖板的那四个销钉，请考虑平放打印来获得足够的结构强度。

轻触开关12x12x7.3mm淘宝链接：[https://item.taobao.com/item.htm?spm=a230r.1.14.11.5aca6bed4bKui5&id=43656265438&ns=1&abbucket=3#detail](https://item.taobao.com/item.htm?spm=a230r.1.14.11.5aca6bed4bKui5&id=43656265438&ns=1&abbucket=3#detail)

Descrição