This is a set of removable inserts for storing Etherfields and all the current expansions. It stores all the cards and masks in the large/deep base game box. The playerboards and tokens are stored in the shallow 5th Player expansion box. The miniatures from the base game and expansions are stored in one of the expansion boxes - I plan on creating a foam insert to protect them.

Base game box internal dimensions: 298 x 298 x 140mm 5th Player expansion box internal dimensions: 300 x 300 x 35mm

The card storage solution supports sleeved cards, I use Mayday standards (MDG7041) and Sleeve Kings 100mm X 100mm (SKS-8838) sleeves for the tiles. Note that the sleeved larger tile cards 'just' fit in the trays - it's very tight, so I recommend using a wide strip of paper as a 'lifter' to be able to remove blocks of cards.

The token storage has two versions of the tokens tray: a single large 3x2 tray (5thPlayerBox_TokensTray.stl), or two 3x1 trays (5thPlayerBox_TokensTray_Alt_x2.stl). Print one or two of the other as per your preference.

UPDATE: 2022/07/05 - reduced the depth of the large card tray wall from 2mm to 1.6mm to squeeze an extra 0.8mm space for the large tile cards trays.

UPDATE: 2022/08/08 - I've included two photographs of the packing foam miniatures storage. The larger mini's are in a 60mm thick packing foam rectangle 300mm x 198mm. There will be a 10mm thick foam base (of the same dimensions). The smaller mini's are in a 30mm thick packing foam rectangle (300mm x 102mm) - these will have a 5mm foam base and a 5mm thick foam topper. As you can see, I just used the existing vaccum formed insert for the other small miniatures and it slots into the gap.

UPDATE: 2023/05/14 - There was an error in the large card tray wall depth. I've now fixed this (see BaseGameBox_LargeCardTray_x2_fixed.stl). This sets the end walls of the tray to 1.6mm each.