Become a barrel maker! Print and assemble this cute wine barrel flower pot.

The wine barrel flower pot makes a perfect gift.

The wine barrel flower pot really consists of 19 single planks which give the barrel a realistic look. The barrel is 13.0 cm (5.12 inches) high and 9.7 cm (3.82 inches) wide. The inner pot has an inner diameter of 6.8 cm (2.68 inches) and an inner heigth of 11.5 cm (4.53 inches).

Please do not resize the model in your slicer, as the tolerances are designed for the present size.

The wine barrel flower pot is basically my object "The wine barrel box" plus an inner pot to hold the soil. The inner pot should be printed in PETG to make it resistant against the humid soil.

If you need another wine barrel without the flower pot functionality, you might consider my following Thingiverse objects:

https://www.thingiverse.com/thing:5390822 https://www.thingiverse.com/thing:5396937 https://www.thingiverse.com/thing:5428998

List of items to print:

• Barrel flower pot segment V1.stl Print this item 19 times.

• Barrel flower pot cover bottom V1.stl Print this item once.

• Barrel flower pot cover top V1.stl Print this item once.

• Barrel flower pot ring large V1.stl Print this item once.

• Barrel flower pot ring small V1.stl Print this item twice.

• Barrel flower pot inner pot V1.stl Print this item once.

• Barrel flower pot segment+1mm V1.stl

• Barrel flower pot segment-1mm V1.stl Use these segments as a substitution for one or more normal segments, if the segments do not form the 360 degrees angle at the end. Example: If there is a 2 mm gap, exchange 2 normal segments against 2 segments which are 1 mm wider each.

You may want to print the following items in a brown color to simulate wood: Barrel flower pot segment V1.stl, Barrel flower pot cover bottom V1.stl, Barrel flower pot cover top V1.stl.

When the following items are printed in a silver color, they look like metal: Barrel flower pot ring small V1.stl, Barrel flower pot ring large V1.stl.

Print the following item in PETG so that it can withstand the humidity of the soil: Barrel flower pot inner pot V1.stl

The assembly is easier than the assembly of my other barrels. You will need a rubber band to avoid frustration. Please look at the assembly instructions further down. No glue is needed, everything comes together nicely.

Enjoy printing this object. So many likes and downloads of this object. Thank you very much.

2022-08-01 New segments

Added STLs Barrel flower pot segment+1mm V1.stl and Barrel flower pot segment-1mm V1.stl. If the segments do not form the 360 degrees, substitute one or more normal sized segments with the 1 mm wider or 1 mm less wide segments.