This part designed for mount Foxeer Toothless V2 Micro FPV camera on the vertical stabilizer of Phoenix 2400.

Also it can be use to mount micro FPV camera on different planes with tail.

Make a groove (or hole, like i did) for wires from camera on side of stabilizer. Put the mount on stabilizer and make two bores with thin awl, through 2mm holes on mount. Then push there 2 stiks of filament (so that thay protrude on 2-3mm), melt end and attach something flat, one by one. Attached the camera with a small screw to this bracket. This principle should apply to any micro FPV cam to be mounted using this bracket.

Good luck!