Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Space Station Phoenix Insert por SkyHarmony no Thingiverse

Descrição

Insert for the board game Space Station Phoenix.

Not rated or tested for vertical storage, though with a spacer (foam, cardboard from Amazon boxes, etc.) it should serve.

Sector trays based on AlexKazam86's files at https://boardgamegeek.com/filepage/240855/3d-printable-sector-cases. (I redesigned them but this was the starting point.)

Filenames contain how many times each thing needs to be printed. The "ALTERNATE" hub trays are for if you want to stack two short ones instead of one large one to sort them better (I like B1-4 in one tray, remaining B in one tray, A in last tray.

Cat not included.

EDIT: Added three ALTERNATE files for sleeved cards (designed for 66x91 sleeves). While it's possible to use the shorter card tray x2, the natural "lift" of sleeved cards may be a problem; the taller tray holds all the cards and has less of this problem.

Thingiverse

Space Station Phoenix Insert

SkyHarmony SkyHarmony (abre em nova aba)
8
Curtidas
0
Downloads
13
Coleções
1
Impressões
Licença Creative Commons - Attribution
Arquivos (14)
Gems_Tray_x1.stl 3.4 KB
Player_Tray_x4.stl 25.2 KB
Card_Tray_x2.stl 39.1 KB
SSP_Sector_Container_x3.stl 88.2 KB
Sector_Spacer_Tray_x1.stl 3 KB
Sector_Spacer_Tray_Top_x1.stl 4.6 KB
Small_Gems_Tray_x1.stl 21.2 KB
Goods_Tray_Bottom_2x.stl 261.2 KB
Goods_Tray_Top_2x.stl 271.4 KB
Hub_Holder_Tall_x2.stl 30 KB
ALTERNATE_-_Hub_Holder_Short_x2.stl 30.6 KB
ALTERNATE_-_Card_Tray_Sleeved_Tall_x1.stl 48.3 KB
ALTERNATE_-_Card_Tray_Sleeved_x2.stl 39.9 KB
ALTERNATE_-_Player_Tray_Sleeved_x4.stl 24.8 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora