pegboard style tool system

my main goal was to have my own system thats free of hardware - no supports - snap clip affair with expandability for the future to install all types of holders - i mainly wanted to make sure the pegs were actually useable, reusable, minimal failures and the least amount of filament required hence why i am primarily using petg for this project due to its durability and decent oil resistance

ACTUAL MAIN BOARD IS 170X190MM

feel free to add to this project, i am gonna be working on this weekly and resizing to fill my drawers. i can see this becoming many types of holders similar to the matco style system but most importantly are the dimensions of the pegboard which has a high resolution of holes - every 10mm this can be used for all types of drawer organization but is currently for sockets only

i do plan on making this more parametric with keys for the boards to lock together

print the pegboard with zero infill, 1 wall, 2 bottom layers, 4 top layers with .22-.2 height and im able to get these down to 56 grams per board

Updates

5.26.22 -v4 pins with a tighter fit

• tolerance test STL to check pin fit before printing main board 5.27.22
• v4 1/2 inch peg open style - to reduce filament usage for largest pin 5.27.22
• updated dimension of mainboard - added a filler 80mm board 5.30.22 -V4 3/8ths open style added - will not do open for 1/4 due to small size -extension holders - closed type 1 & two are endcaps , open is for the center of extension -peg plug - to combine part to board (EXT HOLDER) -peg plug - to sink onto Trays - holders -60x100x25 tray -friction peg plug - more simple peg for tray not requiring excessive clamp force - sort of like a dowel for the tray holder

in progress multiple types of low width boards to take up space - 20mm 40mm 60mm 80mm 100mm needed for both wide and short sides open style pin for 3/8 and 1/2 to reduce filament - leave both options