NOTE - Work in progress no promises I make a complete set. Hopefully this helps others out though.

Tired of my mess of a toolbox I decided to make a few socket organizers. These should work for craftsman socket sets. I will slowly be updating this as I make/print my way through my toolbox. I was inspired by steve1973's socket organization set but my set didn't match up to his completely. I was able to use some items so if I do not have something I likely used one of his.

Keep in mind though the file names call out 12 or 6 point they should work for either, I just needed to keep track of what set I was working on. I tried to make these so that when printed they used less plastic than some other sets I had come across. Unless specified these are printed with PLA, 12% infill, .25 layer height, .39 line width

Reference: 250 drive = 1/4 inch, 375 drive = 3/8 inch, 500 drive = 1/2 inch

File: short 6 point standard 250 drive (13 grams printed) Created for Socket set 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 Note sockets are 22mm tall

File: short 12 point standard 250 drive (12 grams printed) Created for Socket set 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 Note sockets are 22mm tall

File: Deep 6 or 12 point standard 250 drive (33 grams printed) Created for Socket set 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 Note sockets are 51mm long

File: short 6 point standard 375 drive (42 grams printed) Created for Socket set 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Note sockets are 23 to 35mm tall

File: short 12 point standard 375 drive (31 grams printed) Created for Socket set 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 Note sockets are 23 to 35mm tall

File: Deep 12 point metric 375 drive (64 grams printed) Created for Socket set 9mm-19mm, Note sockets are 64mm long

File: Short 8 point Standard 375 drive (12 grams printed) Created for Socket set 1/4, 5/16, 3/8, 7/16, 1/2 Note sockets are 24mm tall

File: Deep 12 point standard 375 drive (43 grams printed) Created for Socket set 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 Note sockets are 63mm tall

File: Short 6 point metric 500 drive (45 grams printed, Verified works with 12 point set if you have it) Created for Socket set 9mm-22mm, Note sockets are 38mm tall

File: Short 12 point metric 500 drive (35 grams printed) Created for Socket set 9mm-19mm, Note sockets are 38mm tall

File: Short 12 point large Metric 500 drive (24 grams printed) Created for Socket set 22mm-26mm, Note sockets are 38mm tall

File: short 6 point standard 500 drive (29 grams printed) Created for Socket set 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 Note sockets are 38mm tall

File: short 12 point standard 500 drive (56 grams printed) Created for Socket set 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1 1/16, 1 1/8 Note sockets are 38mm to tall

File: Deep 12 point metric 500 drive (87 grams printed) Created for Socket set 13mm-21mm, Note sockets are 83mm long

File: Deep 12 point standard 500 drive (97 grams printed) Created for Socket set 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1Note sockets are 38mm to tall