Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D 3D printed braiding machine por Fraens no Thingiverse

Descrição

For more information check out my website: https://fraensengineering.com/

In this video I build a 3D printed braiding machine. The braiding machine was recreated from old photos, from the early days of braiding machines. The braiding machine works really great. So far I have created about 50m of cord without any problems. The output is 42cm per minute. A 24V DC gear motor drives the machine. 6 bobbin holders are used. A bit tricky was the device for tensioning the single cords. But this works perfectly now. If you change the gear ratio, it is also possible to produce cords with a core. All parts are easy to print. Supports are included in the 3D models

Attention: Not all 3D models are available. These will be revised.

The new version you can download from the video description. Check out my Youtube video: https://youtu.be/4jdi63u2LKI

Thingiverse

3D printed braiding machine

Fraens Fraens (abre em nova aba)
712
Curtidas
0
Downloads
868
Coleções
Tags
Braiding braiding machine Flechten Flechtmaschine Seilproduktion
Licença Creative Commons - Attribution - Non-Commercial
Arquivos (29)
Pos.16_6x_sleeve_6mm.STL 22.3 KB
Pos.12_10x_sleeve_3mm.STL 22.3 KB
Pos.4_3x_Guide_gear.STL 118.3 KB
Pos.3_3x_Guide_gear.STL 103.9 KB
Pos.8_1x_Bearing_holder_top.STL 127.1 KB
Pos.1_Slide_plate.STL 337 KB
Pos.20.1_6x_Bobbin_holder.STL 135.2 KB
Pos.15_1x_Bearing_support_top.STL 112.9 KB
Pos.2_Base_plate.STL 170.2 KB
Pos.6_1x_Worm_gear_1.STL 367.4 KB
Pos.14_2x_Clamping_piece.STL 23.1 KB
Pos.5_1x_Motor_gear.STL 209.8 KB
Pos.20.5_6x_Bobbin_holder.STL 76.4 KB
Pos.21_6x_Spacer.STL 15.7 KB
Pos.20.7_6x_Bobbin_holder.STL 202.7 KB
Pos.11_1x_Worm_gear_holder.STL 260.8 KB
Pos.20.2_6x_Bobbin_holder.STL 52.2 KB
Pos.10_1x_Worm_gear_4.STL 177 KB
Pos.9_1x_Worm_gear_3.STL 180.6 KB
Pos.18_1x_Motor_bracket.STL 70.2 KB
Pos.24_2x_Bearing_holder_gear.STL 308.9 KB
Pos.20.3_6x_Bobbin_holder.STL 308.5 KB
Pos.19_3x_Machine_foot.STL 36.2 KB
Pos.20.6_6x_Bobbin_holder.STL 58.6 KB
Pos.20.4_6x_Bobbin_holder.STL 206.8 KB
Pos.22_2x_Puller_wheel.STL 199.5 KB
Pos.7_1x_Worm_gear_2.STL 309.4 KB
Z1_1x.STL 85.3 KB
Z1_1x.STL 85.3 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora