This is an older project here are the work steps I took to create this:

• Create a 3D model of the castle for 8mm and 4mm poplar plywood in OpenSCAD
• Create a 2D projection of the parts also in OpenSCAD and export to SVG
• Post-editing the SVG file with Inkscape and splitting it into separate files for different boards
• Export SVG files as DXF
• Cut out the DXF files (except for the base plates, as they are too large) with a laser cutter from Fablabs-Neckar-Alb: Radium Laser Model 1390
• Cleaning the boards from the ashes from cutting
• Trace a pattern of bricks onto the boards with a ruler and pencil
• Milling a brick pattern with Dremel 3000
• Sanding the boards with sandpaper
• Gluing parts with wood glue to form larger units, such as towers, outer walls, etc.
• Painting the parts (primary color) with acrylic paint
• Partial painting of the details with acrylic paint
• Design of flag base with OpenSCAD and export as STL
• Design the flag with Blender and export as STL
• Prepare the 3D print of the flag parts with slic3r
• 3D printing of the flag parts with CT'c Replicator 2 Clone of the Fablabs-Neckar-Alb
• Creating the flags from flag parts and flower sticks
• Painting details with acrylic paint
• Gluing the larger units into a castle
• Touching up the paintwork at the splices
• Plotting a template for the floor panels with a Din A0 plotter
• Sawing the floor panels with a jigsaw at the Fablab-Neckar-Alb
• Sand the bottom plate edges with sandpaper
• Gluing the floor panels
• Painting the floor panels with acrylic paint
• Soldering and crafting the lighting unit
• Fasten the lighting unit in the castle with Velcro
• Glue wooden blocks into the towers to attach the base plate to them
• Fasten the castle and stairs to the floor panels with wood screws

www.fablab-neckar-alb.org