Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Educational Jet Engine Prototype por brennanclark1213 no Thingiverse

Descrição

Educational Jet Engine Prototype produced as part of my 3rd year University Project.

There is a variety of resources that have been produced as part of this project, with an aim to increase the accessibility of education in Jet Engines (Gas Turbine Engines). All of which will be added to this page soon.

An assembly guide has been provided in the form of a PowerPoint.

Please refer to the BOM to check if you have the capability for printing some of the larger files. These parts were printed mainly with a creator pro 2, as well as a FLSUN.

There are two versions either with or without a motor. The details of the parts are required to purchase can be found in the BOM.

Initial design ideas were taken from Catiav5ftw: https://www.thingiverse.com/thing:1327093

Operating Model: https://youtu.be/QfqngTkKQww

Initial Run: https://youtu.be/geDM-ofcbt8 (Please ignore the Fan alignment issue as the front bearing dried off-axis.)

Educational Animation: https://youtu.be/4sZMAYpFGkc

Thingiverse

Educational Jet Engine Prototype

brennanclark1213 brennanclark1213 (abre em nova aba)
45
Curtidas
0
Downloads
69
Coleções
Tags
aerospace jetengine mechanical model
Licença Creative Commons - Attribution
Arquivos (43)
002_f_support_1.stl 2.2 MB
001_base_1.stl 1.6 MB
001_base_2.stl 1.6 MB
004_f_housing_1.stl 598.7 KB
003_r_support_1.stl 1.6 MB
009_m_housing_1.stl 407.2 KB
005_compressor_housing_1.stl 922.3 KB
011_f_shaft_1.stl 112.4 KB
013_connector_1.stl 81.7 KB
012_r_shaft_1.stl 72.4 KB
013_connector_2.stl 64.7 KB
007_t_housing_1.stl 918.1 KB
014_f_shaft_cover_1.stl 528.8 KB
015_r_shaft_extension_1.stl 388.3 KB
006_combustor_housing_1.stl 910.2 KB
019_lc_fan_2_1.stl 583 KB
022_lowc_stator_2_2.stl 390.9 KB
027_highc_stator_1_2.stl 376.1 KB
018_lc_fan_1_1.stl 613.3 KB
028_highc_stator_2_2.stl 363 KB
017_fan_1.stl 2.8 MB
021_lowc_stator_1_2.stl 411.6 KB
025_hc_fan_2_1.stl 555.3 KB
031_injector_2.stl 16.5 KB
030_combustor_1.stl 746.1 KB
017_fan_2.stl 2.6 MB
024_hc_fan_1_1.stl 570.3 KB
035_t_fan_4_1.stl 567.5 KB
036_t_stator_1_2.stl 347.9 KB
036_t_stator_1_3.stl 2.6 KB
034_t_fan_3_1.stl 551.7 KB
037_t_stator_2_3.stl 2.6 KB
038_t_stator_3_3.stl 2.6 KB
033_t_fan_2_1.stl 535.3 KB
039_t_stator_4_3.stl 2.6 KB
038_t_stator_3_2.stl 361.6 KB
037_t_stator_2_2.stl 347.3 KB
040_nozzle_1.stl 138.8 KB
039_t_stator_4_2.stl 366.3 KB
055_nozzle_2.stl 138.6 KB
042_mixer_1.stl 1.9 MB
032_t_fan_1_1.stl 521 KB
063_mixer_2.stl 1.9 MB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora