Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D The FoxTrot por The__Captain no Thingiverse

Descrição

While this thing totally works, it has been superseded by The Foxtrot Mk II, here: https://www.thingiverse.com/thing:5357578

A reverse engineer of the coconut clopper from trotify.com. Pretty simple mechanism. Assemble with 8mm or 5/16 bolts (whatever they sell near you) with jam nuts and washers where necessary. There is now also a choice between "trot" and "canter". Use the two-tooth eccentric wheel for trot, and the three-tooth for canter.

If you print this whole thing without first printing the test fit ring for the bolts, don't blame me if it won't spin.

Thingiverse

The FoxTrot

The__Captain The__Captain (abre em nova aba)
56
Curtidas
0
Downloads
100
Coleções
Tags
bicycle bike coco clopper coconut foxtrot horse trotify
Licença Creative Commons - Attribution - Non-Commercial
Arquivos (16)
Eccentric_Idler_Canter_Mk3.stl 996.2 KB
Tire_Wheel_Updated_Mk3.stl 205.2 KB
Coconut_Bottom.stl 260.8 KB
Coconut_Top.stl 346 KB
Top_Shell_Adapter_Mk3.stl 19.1 KB
Modern_Reflector_Mount.stl 44.4 KB
Left_Tire_Wheel_Mount.stl 50.2 KB
Right_Tire_Wheel_Mount.stl 50.2 KB
Shaft_Test_Fit.stl 28.2 KB
Left_Body.stl 151 KB
Top_Shell_Mount.stl 151.8 KB
Right_Body.stl 151 KB
Lower_Shell_Adapter_Wider.stl 44.4 KB
Lower_Shell_Adapter.stl 132.1 KB
Top_Shell_Mount_Mk3.stl 141.9 KB
Legacy_Reflector_Mount.stl 54.4 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora