Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Latching Network Cable Organizer selection por gdoniu93 no Thingiverse

Descrição

This is network cable organizer which allows you to clamp from 2 up to 7 6.5mm network cables together. Every clamp consists of two parts 1/2 and 2/2. After printing remove supports and connect them together by simply clicking on piece on another as depicted in the picture. Every clamp allows you for easy adding and removing cables by using simple latching solution. No screws and nuts are required in this project. Make your network environment nice and clean with this network cable organizer.

Thingiverse

Latching Network Cable Organizer selection

gdoniu93 gdoniu93 (abre em nova aba)
396
Curtidas
0
Downloads
608
Coleções
Tags
cable tie Network Network Cable organizer tie
Licença Creative Commons - Attribution - Non-Commercial - Share Alike
Arquivos (12)
5x_-_5x_1-2.stl 37.7 KB
2x_-_2x_2-2.stl 41 KB
2x_-_2x_1-2.stl 37.7 KB
3x_-_3x_1-2.stl 37.7 KB
4x_-_4x_2-2.stl 48.8 KB
7x_-_7x_2-2.stl 60.5 KB
3x_-_3x_2-2.stl 44.9 KB
4x_-_4x_1-2.stl 37.7 KB
6x_-_6x_2-2.stl 56.6 KB
5x_-_5x_2-2.stl 52.7 KB
7x_-_7x_1-2.stl 37.7 KB
6x_-_6x_1-2.stl 37.7 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora