Modular Picture Frame Kit

With this standard-profile set of parts you can construct picture frames for photographs, etc of 4” x 4”, 6” x 4”, 6” x 6”, 6” x 5”, 8” x 6”, 16” x 12” or any other combination. The corner and side joiners are a tight push fit so you can take the frame apart and reconfigure it. Fix the picture in the traditional manner: Insert glass then mount then picture then hardboard backing and secure with masking tape or similar.

PRINT SETTINGS: PLA, PTEG or ABS Layer height: 0.2 mm Infill: 10% No brim, skirt or supports required POST PRINTING: None

Regards, Paul