The updated version is here! : https://youtu.be/7fEnXuf5JIQ

Demo and design process: https://youtu.be/OYxdLfMX5yY

There is also a summer version: https://www.printables.com/fr/model/164289-fast-rc-tank https://youtu.be/IU3rbzvLTOE

Update on the project: https://youtu.be/7fEnXuf5JIQ

Hi, the main goal of this project is to create a fast and fun to drive tank.

This is not a beginner's project. You need to know how to mix and wire the motor and esc. already. The mechanical assembly is not so complicated. I don't have an assembly tutorial for this project now, but I've put some pictures of the robot disassembled to help understand how it's built.

If you have any questions about the project, feel free to ask them in the comments section. Enjoy

Parts and quantity to print:

• 64x track_link-v7
• 128x track_plate-v2
• 1x Jig_for_assembly_v4
• 4x drive_cog-15t
• 2x side_full-slide-F-v2
• 2x side_full-slide-M-v2
• 4x supp bearing-v9
• 2x supp gb and bearing-v8
• 2x supp moteur n bearing_v8
• 2x top_plate-slide
• 2x bumper-160mm

Link for parts: ( I put amazon link of product that have the same spec that the one I use in this project. You can probably find some of those part somewhere else for cheaper and in the right quantities for the project)

320x 1in screw -- https://www.amazon.ca/gp/product/B07PQS4NFB/ref=ppx_yo_dt_b_asin_image_o01_s00?ie=UTF8&psc=1

1x stainless steel wire 1/16in -- https://www.amazon.ca/dp/B08GFCJHG6/ref=cm_sw_em_r_mt_dp_RM6GX2TDMZGTT4N7A5DA?_encoding=UTF8&psc=1

2x motor and ESC (540 – 4370KV) -- https://www.amazon.ca/dp/B07RBFXM69/ref=cm_sw_em_r_mt_dp_CFQ72QVH30QVYYGE6VSC?_encoding=UTF8&psc=1

2x Planetary Gearbox (D90 17:1) -- https://www.amazon.ca/dp/B07N84SW3X/ref=cm_sw_em_r_mt_dp_4ZASBN0QA3VR1N5BBGS9?_encoding=UTF8&psc=1

8x Bearing (6200-2RS) -- https://www.amazon.ca/dp/B00EPNN62M/ref=cm_sw_em_r_mt_dp_CM98ZCJSXSQ3JAWKFB9V?_encoding=UTF8&psc=1

2x pulley out (gt2 – 8mm – 60t) -- https://www.amazon.ca/dp/B07MHL96L7/ref=cm_sw_em_r_mt_dp_78E59Z58KRZH8W13EXKH

2x Pulley in (gt2 – 5mm – 30t) -- https://www.amazon.ca/dp/B08BZPPMV6/ref=cm_sw_em_r_mt_dp_AFTQKBQFQTRJGDS7MTMX?_encoding=UTF8&psc=1

2x Belt (gt2-6 – 160mm) -- https://www.amazon.ca/dp/B08DQW4836/ref=cm_sw_em_r_mt_dp_ZTPCGARJ6X8MTCGP737A?_encoding=UTF8&psc=1

1x 8mm shaft (need to be cut to size (4x 70mm)) -- https://www.amazon.ca/dp/B08XYSD8SR/ref=cm_sw_em_r_mt_dp_J4521SDBG6R6D8EZMF9F?_encoding=UTF8&psc=1

4x 8mm hub -- https://www.amazon.ca/dp/B08335MYGW/ref=cm_sw_em_r_mt_dp_XHEN4G07ZD3A4TPCWR50

1x Battery(2s or 3s) -- https://www.amazon.ca/dp/B08CHJ9G3M/ref=cm_sw_em_r_mt_dp_27VVFJ8Z9CHNKYSKDD5S?_encoding=UTF8&psc=1

1x Rc controller and reciver (chose the one you like. I use this one(radiolink T8S:) -- https://www.amazon.ca/dp/B09BTSJN7P/ref=cm_sw_em_r_mt_dp_TN72MN8JE9W21BDVKRCJ?_encoding=UTF8&psc=1

20x M5 screw (10mm length)

Xx Wire and connector to plug 2 esc in one battery