Remix mostly from asuahsahua. I also remade a half-height container based on zulizu's model.

Main changes were related to space consolidation and reducing number of unique prints. The Tile and Card Tray now holds all of the tiles, removing the need for the separate tech tile tray. The height offsets to get the tiles higher in the tray are now built into the holder, no supports needed. The Federation Token tray now has a cover, as many users complained about those piece falling out when setting the box on end.

The small half-height trays are great for storing the small tokens and pieces. The divider is not quite large enough to allow all of the small green cubes to fit in one side. With the space reduction in the box, there is actually room to build 2 additional half-height storage containers if you want to separate those items further. Or, print a different tray to fit at the end of the boards as others have done.

I use a 0.5mm nozzle, so all the wall thicknesses are based on the 0.6mm extrusion width. I found the thinner walls in these models are more than sturdy enough.

Part Count: 1X everything except 2X Map Holder 7X Player Container Holder 2X Player Container Holder Half Height 9X Player Container Lid