I changed the original desing of the casing so it could house an Amzon basic USB 3.0 extension cable. I made an opening in the top for the USB port with some supports below it to keep it in place and a hole in the back to put the cable through. The cable goes in from the top, it is a bit of a struggle but it will get in. I also put some weights at the bottom to make sure the case doesn't get pulled around by the sturdy cable.

You can use the side panels from the original. Printing is also the same as with the original.

Amazon Basic 3.0 extension cable: https://www.amazon.de/gp/product/B014RWAMWC 5g and 10g weights: https://www.amazon.de/gp/product/B01M4M7DJ6