Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Modelo 3D Retraction / Stringing tower test with temperature set por Ivan111 no Thingiverse

Descrição

I tested some of the retraction and stringing test here, there are good ones, but i wanted to create my own one with the idea of an economic to print and simple two tower desing. Also I wanted the temperature ranges were visible enough, but maintaining the size of the towers small and slim.

I created a set of preset towers with a 25 degrees range (covering the most common materials), one without temp texts (to allow someone editing the mesh to customize it for another specific range of temps), and finally one with a 50 degrees range just in case.

The tower is just 30mm tall and 33mm long. Anyway, I added one photo with some dimensions.

Thingiverse

Retraction / Stringing tower test with temperature set

Ivan111

Curtidas

Downloads

Coleções

Licença Creative Commons - Attribution - Non-Commercial - Share Alike

Arquivos (7)

test_retraccion_sin_textos.stl 80 KB

test_retraccion_225-200.stl 304 KB

test_retraccion_245-220.stl 310.6 KB

test_retraccion_250-200.stl 317.7 KB

test_retraccion_215-190.stl 291.5 KB

test_retraccion_235-210.stl 311.8 KB

test_retraccion_255-230.stl 307.9 KB

Ver no Thingiverse

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta

Comparar agora