Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Generate cartoon-styled gemstones with our latest, free, 3D printable design.
This simple customizable design allows you to choose the number of sides, dimensions and proportions of your gemstones.
This design is completely free and shared under a permissive license. Your support is hugely appreciated.
Did you know?
Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our premium projects:
https://codeandmake.com/premium
OpenSCAD Customizer Options
We recommend you use OpenSCAD to customize this design.
This design has the following Customizer options:
General
- `Diameter` - Diameter at widest point
- `Sides` - Number of sides
Bottom
- `Bottom_Height` - Uncut height of bottom section
- `Bottom_Cutoff_Percent` - Percentage to cut from bottom section
Middle
- `Middle_Height` - Height of middle section
Top
- `Top_Height` - Uncut height of top section
- `Top_Cutoff_Percent` - Percentage to cut from top section
Printing
- `Orientation` - Rotate onto face for easier printing
Preview
- `Show_Uncut_Ends` - Show uncut ends in preview mode
Design Considerations
In many cases, it should be possible to print designs without supports. For the best results, consider the angle of overhangs and use the `Orientation` option.
Material
This design is perfect for printing in most filaments, but we recommend translucent filaments/resins in particular for this design.
Versions
- 1.1 (29 Jan 2022)
- Added Customizer tabs
- Increased max `Sides` to 12
- Added option for middle section (`Middle_Height`)
- Added `Show_Uncut_Ends` preview option
- Updated `Orientation` options:
- Renamed `Side` to `Bottom Side`
- Added new `Side` option
- Added `Top Side` option
- 1.0 (28 Jan 2022) - Initial version
Printing
Recommended slicer settings:
- Resolution: 0.1mm - 0.2mm
- Infill: ~10 - 20% recommended.
- Supports: Should not be required for most designs, but designs with significant overhangs will require supports.
- Rafts: Not required, unless you experience adhesion issues.
License
The "Gem Generator" models (.stl) are licensed under the CC BY license by Code and Make.
The "Gem Generator" code (.scad) is licensed under The MIT License by Code and Make.
Note: 'BSD' license has been selected as it is the closest available option in the list.
We are proud to offer content to you absolutely free.
We love to create free content for you. As you might imagine, it takes a lot of time. Supporters help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:
https://codeandmake.com/support
We thank you so much for your support!
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta