There is a YouTube video about sharpening hand tools scary sharp. I liked it and rather than making his jig out of wood I thought I would make one to print.

Printed items: 1x Chisel Sharpening Upper Jig 1x Chisel Sharpening Lower Jig 5x Bearing spacers (in between the jig and bearings)

Materials needed: M8x1.25 x 85mm (or longer) M8 nut 4x 608 bearings 2x M8x1.25 bolts (I used 50mm to hold the upper jig) 2x M8x1.25 wingnuts (you could use nuts if you wanted to save a little)

Alternate: If you don't want to get bearings and would just prefer the wheels were printed you don't need to print the spacers or buy the bearings you just need to print the "Roller" or "Roller Alternate" instead.

The video about how to sharpen tools is here: https://youtu.be/xYy-U2_ylAA Leave the creator a like too.