PVS-69.2v16 is out youtube video coming soon chanmges made to the side panels and two housing are available one for horizontal and one for vertical printing

I made a couple small changes as the sensor screw for the left body would not work. v20 is working. i also added a J arm that lets you run two right side housing as a BINOC

this is a working prototype for the PVS-69 NVG system. I am still actively making changes however i am confident enough in the current set up to release it. this design allows for focusing of the camera as well as the focal lens as well as adjustment of the operational angle using a bolt through the J arm. ignore the STL everything you need is in the .3mf

as stated this design is in a working prototype status and there are still small tweaks that eed to be made so please leave some comments describing any issues

You may notice theres no dedicated location to plug this in at. on the rear of the side panel theres and are which you can drill out and run your power cord through. currently i havent found a switch that i think suites this design so youll have to come up with your own i want this design to be as waterproof as possible so i suggest using teflon tape on the threads.

In the works i have a new bridge style with new J-arms

the electrical components you will need are adafruit 2" NTSC/PAL tft fpv camera you can use runcan pheonix, night eagle or you can use foxeer night cat google cardboard vr headset (you will need the focal lenses form these)

Build tutorial is probably coming soon