ERROR 404 APPEARS WHEN TRYING TO "DOWNLOAD ALL" THE FILES.

SOLUTION: Click where it says "Thing files" below the pictures, from there you can manually download all the required files one by one.

Watch the full build video here: https://youtu.be/yp67qvfYZVM

Please make sure your printer is properly calibrated before even attempting to print this. I recommend a 100x100x100mm calibration to get most accurate results. Proper calibration is key to a nice looking case.

Required printbed: 300x300x300mm.

KEY FEATURES:

• Support for both mATX and ITX motherboards
• GPU up to 320mm
• Support for one 240mm AIO cooler
• SFX Psu
• 4x 2.5 HDD or 2x 3.5 HDD
• 3 intake fans and 3 exhaust fans

Do you enjoy my work and want to support me? Buy me a coffee! https://www.buymeacoffee.com/makerunit

SCREWS AND OTHER REQUIRED TO BUILD CASE: 8 • 5x30mm wood screw (for attaching main chassis both sides) 14 • 3.5x16mm wood screw (for magnet mounts, usb bracket, upper front chassis) 13 • M4x12 machine screw (for motherboard, frame brace, gpu) 11 • M4 nut (for motherboard, frame brace, gpu) 12 • 8x3mm Neodymium magnets (for magnetic front panels)

TO MOUNT HARD DRIVES: 4 • "6-32" computer screw (mounting brackets to motherboard plate) (found in screw kit) 4 • M3-0.50 screw (mounting bracket to HDD) (found in screw kit)