Simple single sided mold generator

The metals : In the second image you can see three casts: 1: Pure Sn97Cu3 (from local hardware store), 2 and 3: Sn97Cu3 with an added small Bismuth pellet, the third was made with leftovers from the second cast. Using Sn97Cu3 gives you a shiny finish, adding bismuth adds detail and a more matte surface. (mold 1: 0.20mm, 2/3: 0,125mm layer height)

Caution: If you try to pour cavities deeper 5mm, you may loose the form due to melting! (Atleast with the tested tin)

Generating the mold (same as James Webbs generator):

Download the mold_v2.scad file and open it in OpenSCAD.

Update the parameters in the script to point to your model, as well as transform it to be suitable for printing.

Compile and Render (F6) the script with your updated parameters.

Grab an STL using the "Design > Export as STL" tool. optional: Seperating the mold in 2 pieces

Load the STL in Netfabb basic, rightclick extras->repair part

Use "select shells" to select and then delete one of the 2 parts

repeat for the other part.

(default STL used in the script is sappo.stl, provided in the downloads)

Casting the metal parts: Use ABS plastic for the molds, slightly sand the 2 facing surfaces for better alignment. Clamp the 2 parts ( http://www.thingiverse.com/thing:12616 works great). Heat the metal to be just above the melting temperature, best is to move it a bit around before pouring. Pour into the mold. After it has settled a bit you can drop it in a glass of water for faster cool down.

Twisting the 2 molds against each other works pretty well to remove the mold.

Descrição

Instruções