Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
PiNAS
Find this on GitHub at https://github.com/fabriziofiorucci/PiNAS
Description
PiNAS is a 3D printed compact NAS enclosure based on Raspberry Pi and up to two SATA HDD/SSD units connected to the Raspberry Pi via SATA to USB converter.
Software-wise it runs on Raspbian and Samba/FTP/anything you like. Power supply can be provided using a 12V 5A external PSU that will power the +12V lines of HDD/SSD drives. +5V power supply can be provided using a small buck converter such as the DC DC Step Down MP1584 that can provide up to 3A of current, enough to power the Raspberry Pi and the two disk units.
3D components
All parts should be printed using:
- PLA filament
- 3 walls
- 0.1mm layer height
- 15% infill
- print plate adhesion raft if needed
Use:
- 'Raspberry Pi 2 plate.stl' for Raspberry Pi 2
- 'Raspberry Pi 4 plate.stl' for Raspberry Pi 4
Additional hardware needed
- 120x120x25mm PC fan (ie. https://www.aliexpress.com/item/1005002404506907.html)
- female-to-female RJ45 back-to-back adapter (ie. https://www.aliexpress.com/item/4000204295845.html)
- External mains to +12V 5A power supply unit (ie. https://www.aliexpress.com/item/4000859284925.html)
- 5.5 mm x 2.1mm DC Power Jack Socket (ie. https://www.aliexpress.com/item/32902615756.html)
- Up to two SATA to USB adapters (ie. https://www.aliexpress.com/item/1005003156749957.html)
- MP1584EN DC-DC Converter Step Down Voltage Regulator Module (ie. https://www.aliexpress.com/item/4000016331112.html)
- On-off switch (ie. https://www.aliexpress.com/item/32869269215.html)
- M3 and M4 screws
- SATA power and data cables
- Up to two 3.5" HDD/SSD units
- Raspberry Pi 2/3/4
- Cat 5/6 cable
