Designed to more securely attach the drainage hose of a washing machine to a kitchen sink, the guide hooks onto the sink and countertop. The guide has been designed in 2 parts, the guide and the hose rings. The hose rings slide into place along the back of the hose guide. Just print 2 to 3 rings and slide them into place.

Thread the hose through the rings and secure with a string, rubberband, or whatever if too loose. Print and thread the bolt to brace the base guide to the sink.

The guide base has a cleaerance of about 36mm, the thinkness of my countertop. It extends a bit further to allow the bolt to help secure the guide using the bolt. The guide is about 120mm long, the distane from inner sink to counter edge.

Update: Included a new hose clamp, which has an open top, making it easier to snap the hose into the clamp, instead of threading. Also, even though the clamp is more secure than what comes with the washer, I tend to tether the end of the hose, where it extends from the clamp, to a knob or faucet, as a precaution.